Differences between revisions 13 and 14
Revision 13 as of 2006-09-21 11:44:09
Size: 7409
Editor: planck
Revision 14 as of 2006-09-21 11:52:48
Size: 7758
Editor: planck
Deletions are marked like this. Additions are marked like this.
Line 222: Line 222:
FFTW (Fast Fourie Transform library)
FFTW (Fast Fourier Transform library)
Line 275: Line 275:
Copy this script to `/usr/local/bin/dacapo.run`. You might have to edit the location and names of the serial and parallel executable in this script,
i.e the lines::

    # Name of serial and parallel DACAPO executables

If OpenMPI is not installe under `/usr` you will also have to this in the script.
Copy this script to `/usr/local/bin/dacapo.run`.

Download and Installation

2   Installation

The next section describes how the fortran program, pseudopotentials and python interface can be installed.

If you have a installation using the old CamposASE, it is enough just installing the new python interface, see dacapo python interface.

2.1   dacapo fortran program and pseudopotentials

This section describes how the fortran program and pseudopotential are installed. Current version of the fortran program is 2.7.7.

2.1.1   From RPM

A binary RPM (tested and builded using Pentium 4) can be used to install dacapo on a Pentium 4 system.

This will install pseudopotentials in /usr/share/dacapo/psp and binary executable in /usr/bin.

2.1.2   From Tarfile

A Dacapo tar file containing fortran source code and pseudopotentials can be used to install dacapo on a non rpm system.

Use gunzip Dacapo-2.7.7.tar.gz.   Dacapo binaries for different platforms

The page dacapo binaries list dacapo binaries for different platforms.   Compling the fortran source code
cd src gmake <arch> [MP=mpi]

here <arch> is one of:

  • sun_ss10

    Sun sparcstation 10/20)

  • ibm_power3

    RS/6000 power3 node

  • ibm_power2_wide

    RS/6000 wide power2 node

  • ibm_power2_thin

    RS/6000 thin/thin2 power2 node

  • sgi

    Silicon Graphics n32 ABI

  • alpha

    Digital Alpha

  • pglinux

    Portland Group pgf90 compiler on linux

  • intellinux

    Intel ifc Fortran compiler version >=6.0 on Linux

More details will follow here shortly.   Installing the pseudopotentials

The dacapo fortran program adds the enviroment variable DACAPOPATH to the pseudopotential filename (if the file is not found in the currebt working directiory). Copy all pseudopotentials to a directory and set the DACAPOPATH environment variable to this directory:

cp psp/*/*/*.pseudo /some/directory/
setenv DACAPOPATH /some/directory/

2.2   dacapo python interface

  1. Get the latest version of the dacapo python interface.

    1. From tar file
    2. cvs:
      cvs checkout dacapo/Python
  1. for case 1 unpack the tar file and:

    [home] $ cd Dacapo

    (for case 2 cd dacapo/Python)

  2. and install with the standard setup.py script (if you have root permission):

    [Python] $ python setup.py install

    If you do not have root permission use:

    [Python] $ python setup.py install  --prefix=/some/where/in/your/path

    In this latter case you must set your PYTHONPATH environment variable, as directed by the setup.py script.

  3. Alternative to step 3 simply set the PYTHONPATH environment variable to your cvs directory.

3   CVS access

You can access the code from CVS. See the Campos CVS Page.

After the CVS login, get the dacapo fortran source using:

cvs -d :pserver:USERID@cvs.fysik.dtu.dk:/home/camp/CVSROOT checkout dacapo/src

Get the pseudopotentials using:

cvs -d :pserver:USERID@cvs.fysik.dtu.dk:/home/camp/CVSROOT checkout dacapo/psp

Get the Python interface using:

cvs -d :pserver:USERID@cvs.fysik.dtu.dk:/home/camp/CVSROOT checkout dacapo/Python

4   Running Dacapo in parallel

Dacapo can run in parallel using the MPI parallel library. You need to compile a parallel executable:

gmake <arch> MP=mpi

For getting dacapo to work in parallel with ASE you need to make a script dacapo.run, which should be executable and in your path. dacapo.run is an example of such a script. This example use the LAM/MPI and the PBS batch system.

If you do not use a batch system you can replace the line:


with a explicit file containing the names of the nodes, one on each line:


5   Notes for installation on specific computers

5.1   Opteron (pathcscale compiler)

This build assumes you have the Pathscale Fortran compiler, the OpenMPI message passing library and the ACML library installed. Below follows details on how to build the NetCDF and FFTW libraries needed by dacapo.

5.1.1   NetCDF (Network common Data Format)

Download the NetCDF sofware

Build netcdf like this:

tar -zxf netcdf-3.6.1.tar.gz
cd netcdf-3.6.1
./configure --prefix=/usr FC=pathf90 FCFLAGS=-byteswapio CC=pathcc CXX=pathCC

and then install in /usr running as root:

make install

See also niflheim note on netcdf.

5.1.2   FFTW (Fast Fourier Transform library)

Download version 1.2.5 here Build FFTW like this:

tar -zxf fftw-2.1.5.tar.gz
cd fftw-2.1.5
./configure F77=pathf90 CC=pathcc CFLAGS=-O3 FFLAGS=-O3

and then as root:

make install

This will install FFTW in /usr/local.

5.1.3   dacapo

Unpack the dacapo tar-file:

tar -xzf dacapo-2.7.7.tar.gz
cd dacapo-2.7.7/src

Set the environment variables:

setenv ACML /opt/acml3.5.0/pathscale64
setenv NETCDF /usr/local/lib
setenv FFTW /usr/local/

Now compile dacapo:

gmake pathscale
gmake pathscale MP=mpi

Now copy the compiled executables to somewhere on your path, eg.

cp pathscale_serial/dacapo.run /usr/local/bin/dacapo_<version>.run
cp pathscale_mpi/dacapo.run /usr/local/bin/dacapo_<version>_mpi.run

5.2   OpenMPI

For dacapo to run together with ASE you need a dacapo.run script in your path, that will start the correct dacapo executable. This OpenMPI dacapo.run script assumes you are running OpenMPI using the PBS batch system.

You might have to edit the location and names of the serial and parallel executable in this script, i.e the lines:

# Name of serial and parallel DACAPO executables

If OpenMPI is not installe under /usr you will also have to this in the script.

Copy this script to /usr/local/bin/dacapo.run.

Dacapo: Installation (last edited 2012-09-16 17:08:32 by MarcinDulak)